SK Series Water Ring Vacuum Pumps is used to pump or compress air and other air that is not corrosive, not water-dissolving and does not contain any solid grains, so as to form vacuum type pressure in airtight containers and meet the requirements of technique flow. A little liquid state air is allowed in the pumped or compressed air.

SK Series Water Ring Vacuum Pumps is widely used in industries of mechanics, oil, chemical, pharmaceutics, foodstuff, ceramic, sugar refining, dying and printing, metallurgy and electronics.During the course of operation, the compressing of air by this pump being conducted under constant temperature, little danger will possibly occur when pumping or compressing flammable and easy-to-explode air, which makes its application more extensive.

SKA Series Water Ring Vacuum Pumps is is suitable for pumping gas and steam, the suction pressure can be 33mbar. When the suction pressure is lower than 80mbar, the pump should be protect by the protect pipe ,if with the atmosphere eject set, the suction pressure can be 10mbar, the eject set can be installed with the vacuum pump directly ,Using as the compressor, the maximum pressure is 0.26mbar.

SKA Series Water Ring Vacuum Pumps is widely used in mechanical, petrochemical, pharmaceutical, food and confectionary industry, as well as in electron field. During the opereation, the gas is compressed isothermally .when compress or extract corrosive or explosive gas , danger will not occur. So the pump is used even widely in many fields.

Configuration and Advantage:
1) The pump and motor is directly coupled, smaller occupied floor, easier installation.
2) Using the mechanical seal, avoid the leak and maintenance.
3) Operation calm and lower noise ,the minimum noise is 62 dB.
4) Corrosion-resisting design, and we can use the bronze and stainless steel as rhe user's repuests.
5) Especially vent design, ensure the best efficiency in the scope of performance.

SKA-series Performance Curve Chart